Sale!

Network Cable Tester NF-8209

$ 77.17
NOYAFA NF-8209 Network Cable Tester and Tracer with Anti-jamming Porbe, Crimp, PoE Port Locate The Target Cable Quickly – Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments. Ethernet Continuity Test – Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly. Measure Cable Length Accurately – Measure the network cable in the range of 2.5m-500m. Port Blink Test – Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch. PoE Testing – Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard). Work Safely – Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience. Rechargeable Battery– The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power. Other Functions – Quality control of the crimping crystal. Certification – Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard. Wiremap: Cable types: CAT5/CAT6 Cable sequence and fault testing: Normal, open circuit short circuit, cross,etc STP/UTP: Both compatible Max range: 600m / 1,968ft QC Test: Test type: 8P Response speed: No longer than 1 second Minimum recognition: 10cm / 3in Length: Test line: CAT5 & 6 Test range: 2.5 – 200m /8 – 656ft Accuracy: ≤20m±4.6m; 20-100m ±2.4m; >100m±3.2m Scan: Cable type: CAT5 & 6 Max signal voltage: 5V ± 1.0VP-P Frequency: 455KHz Dual mode: Analog / digital mode Max range: 600m / 1,968ft PoE: Voltage test range: DC 5-60V Power supply core jumper mode: End jumper, middle jumper, 8-core power supply, unknown. PSE type: Non-standard, IEE802.3at/af Port Blinks Full-duplex/ half-duplex recognition Auto-negotiation/ non-auto-negotiation Switch type: 10m/100m/1000m Transmitter: Network Cable Tester NF-8209 LCD Display: 180*64 with backlight Language: Chinese/English Ports: RJ45 * RJ11 Power supply: 3.7V 1400mAh polymer lithium battery Low battery power indication: yes Auto-off: 15/30/60min or off Voltage protection: DC60V Maxi working current: ≤200mA Size: 125*70*32mm Receiver: Adjustable scan strength: Yes NCV: AC70V – 1000V 50/60Hz Voltage protection: DC 60V Maxi working current: ≤200mA Ports: RJ45 Voice prompt: yes Headphone jack: yes LED: Power indication & LED lighting Power supply: 3.7V 1400mAh polymer lithium battery Size: 198*50*30mm

Get the DNA Water Purifier with the DNA Sparkler Sparkling Silver and a DNA CO2 Cylinder.

DNA Water Purifier

The DNA Water Purifier is a countertop Water Purifier requiring no installation and featuring 4-Stage Water Purification including Filtration via Reverse Osmosis, as well as 5 different temperature settings from ambient temperature up to 95°C, therefore producing instant hot water on demand. It is completely portable, looks great on your counter, measures the TDS of water prior to as well as after purification and indicates when water filter cartridges need replacing. Safer than Tap Water and Bottled Water because all contaminants have been removed from Tap Water and Free of harmful Micro Plastics and Nano Plastics found in Bottled Water.

DNA Sparkler

The DNA Sparkler is a one-of-a-kind Sparkling Water and Beverage Carbonator. With its modern design and premium finish, the DNA Sparkler will sit perfectly in your kitchen, allowing you to carbonate any beverage in style. Get creative and carbonate your own beverages, from making soda water, fruit infusions, juices, hard and soft seltzers, cordials, cocktails, mocktails, and more. Alternatively, you can simply recarbonate a ‘flat’ soda with the easy-to-use carbonator. The Smart Injector Nozzle maximizes the infusion of CO2 into the bottle, preventing the loss of fizz and enhancing the taste of every beverage. The DNA Sparkler is compatible with all major brands of 60L CO2 cylinders.

DNA Sparkler CO2 Cylinder

The DNA Sparkler CO2 Gas Cylinder is filled with 400g of food-grade CO2 and can be conveniently refilled. Specifically designed for use with the DNA Sparkler,  this cylinder can make up 60 litres of carbonation. Send your empty cylinder back to us and we will give you R140 rand back for your next refill. We will arrange for the collection of the CO2 Cylinder at your home when you order your refill through our website. Please note that the Courier will occasionally send 2 separate drivers, one to collect the empty cylinders and another to deliver the refills, and this may happen at different times or days. This is completely normal even though it may seem odd – they know what they are doing.

Additional information

Weight 14 kg
Dimensions 49 × 58 × 25 cm