Sale!

BP-100 : 100A BatteryProtect LVD by Victron

$ 57.02

Description This is the BP-100 BatteryProtect LVD by Victron. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. BP-100 Features 12/24V auto ranging The BatteryProtect automatically detects system voltage Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. A special setting for Li-ion batteries In this mode the Battery Protect can be controlled by the VE.Bus BMS. Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. Ignition proof No relays but MOSFET switches, and therefore no sparks. Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage. BP-100 Specifications in Brief Maximum continuous load current : 100A Peak current (during 30 seconds) : 600A Operating voltage range : 6 –35V Current consumption : When on: 1,5 mA When off or low voltage shutdown : 0,6 mA Alarm output delay : 12 seconds Maximum load on alarm output : 50 mA (short circuit proof) Load disconnect delay : 90 seconds (immediate if triggered by the VE.Bus BMS) Load reconnect delay : 30 seconds Default thresholds : Disengage: 10,5V or 21V Engage: 12V or 24V Operating temperature range : Full load: -40°C to 40°C (up to 60% of nominal load at 50°C) Connection : M8 Weight : 0.5 kg/0.6 lbs Dimensions (hxwxd) : 59 x 42 x 115mm (2.4 x 1.7 x 4.6″) Download the spec sheet here BP-100 : 100A BatteryProtect LVD by Victron

Categories: Cookie Equipment, Copper Combo Packs,

Get the DNA Water Purifier with the DNA Sparkler Sparkling Silver and a DNA CO2 Cylinder.

DNA Water Purifier

The DNA Water Purifier is a countertop Water Purifier requiring no installation and featuring 4-Stage Water Purification including Filtration via Reverse Osmosis, as well as 5 different temperature settings from ambient temperature up to 95°C, therefore producing instant hot water on demand. It is completely portable, looks great on your counter, measures the TDS of water prior to as well as after purification and indicates when water filter cartridges need replacing. Safer than Tap Water and Bottled Water because all contaminants have been removed from Tap Water and Free of harmful Micro Plastics and Nano Plastics found in Bottled Water.

DNA Sparkler

The DNA Sparkler is a one-of-a-kind Sparkling Water and Beverage Carbonator. With its modern design and premium finish, the DNA Sparkler will sit perfectly in your kitchen, allowing you to carbonate any beverage in style. Get creative and carbonate your own beverages, from making soda water, fruit infusions, juices, hard and soft seltzers, cordials, cocktails, mocktails, and more. Alternatively, you can simply recarbonate a ‘flat’ soda with the easy-to-use carbonator. The Smart Injector Nozzle maximizes the infusion of CO2 into the bottle, preventing the loss of fizz and enhancing the taste of every beverage. The DNA Sparkler is compatible with all major brands of 60L CO2 cylinders.

DNA Sparkler CO2 Cylinder

The DNA Sparkler CO2 Gas Cylinder is filled with 400g of food-grade CO2 and can be conveniently refilled. Specifically designed for use with the DNA Sparkler, this cylinder can make up 60 litres of carbonation. Send your empty cylinder back to us and we will give you R140 rand back for your next refill. We will arrange for the collection of the CO2 Cylinder at your home when you order your refill through our website. Please note that the Courier will occasionally send 2 separate drivers, one to collect the empty cylinders and another to deliver the refills, and this may happen at different times or days. This is completely normal even though it may seem odd – they know what they are doing.